Clifford SmartWindows 4 Installation Guide Page 9
- Page / 15
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
© 2005 directed electronics—all rights reserved
9
7. Set the timer duration to proper time interval with 2-seconds added to that time
interval.
section 2—window rollup
NNOOTTEE::
This may require the use of an optional relay(s).
The instructions in this section apply to systems with the built-in window roll up fea-
ture. If the windows can be closed using a key in the door of the car, see section 1
above.
motor/switch connections
1. Turn the ignition switch to the “ON” position.
2. Access the wires at the window switch.
3. Connect a voltmeter lead to ground.
4. Connect the other voltmeter lead to a wire at the window switch and find the wire
that shows 12V while pressing the window switch as if rolling the windows up.
a. If the voltmeter reads 12V while pressing the “UP” side of the switch, make
the connections as shown in diagram A, otherwise proceed to step 5.
5. Connect the (-) voltmeter lead to +12V and probe the UP wire without activating
the switch.
a. If the voltmeter reads 12V, make the connections as shown in diagram B.
b. If the voltmeter reads 0V, make the connections as shown in diagram C.
NNOOTTEE::
If the vehicle has power window switches only on the center console (no door
switches), you may make the appropriate connections at the console switch. If there
are door switches, it is recommended that you make the connections at each door
window motor.
If the vehicle has relay-driven motors, or one-touch switching, the connections must be
made
aafftteerr
the controlling relay or module.
programming the windows
Use the installer programming section in the security installation manual to program
window roll ups.
Related products and manuals for Security access control systems Clifford SmartWindows 4
(14 pages)Honda 2005 S2000 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein Honda 2005 S2000.
Wir stellen 1 PDF-Handbücher Honda 2005 S2000 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comments to this Manuals