Remote Control Operation
The AvantGuard 4 comes with two ergonomically designed remote controls: a 16-channel master remote and a 4-channel secondary
“companion” remote. Up to a total of four AvantGuard 4 type remote controls can be added to the Av antGuard 4 system. Due to
the ACG 2 feature on the AvantGuard 4 system, older Clifford ACG and non-ACG remotes are incompatib le with the AvantGuard
4.
Mas ter Re mote Con trol Operation
To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. While you transmit, the
LED indicator on the remote control will flash once every second: this indicates level 1.
To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts buttons 1–4 to
level 2 (channels 5–8). Then press the desired button within the next 7 seconds. For instance, to
transmit channel 5, press the LevelShift button once, then press button 1. while you transmit, you’ ll
notice that the LED indicator on the remote control flashes twice, pauses, flashes twice, etc.: thi s indicates level 2.
To transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts the buttons to level 3 (channels 9–12). Then press
the corresponding button within the next 7 seconds. The LED on the remote control flashes three times to indicate level 3.
To transmit channel 13, 14, 15 or 16: Press the LevelShift button three times. This shifts the buttons to level 4 (channels 13–16).
Then press the corresponding button within the next 7 seconds. The LED on the remote control flashes four times to indicate level 4.
NOTE: One sec ond af ter you stop trans mit ting levels 2, 3 or 4 (chan nels 5–16), the re mote aut o mati cally
re turns to level 1 (chan nels 1–4).
Remote Control Channel Assignments
Chan nel # Func tion Chan nel # Func tion
1 Arm/Disarm 9* Remote Valet*
2* Activate Auxiliary A (usually remote trunk release)* 10 Proximity Sensor Override
3 Silent Arm/Disarm 11 AutoStart/AutoTherm or Manual Transmission Enable
4 Remote Engine Starting 12* Unassigned*
5* Timed Headlight Activation 13* Unassigned*
6* SmartWindows 4 Accessory* 14* Unassigned*
7* Activate Auxiliary B* 15 Adjust Sensitivity of Optional OmniSensor
8* Activate Auxiliary C* 16 Adjust Sensitivity of Proximity Sensor
* These channels can be assigned to control other Clifford ACG 2 systems and accessories on multipl e vehicles.
Companion Remote Control Operation
For more information on companion remote
control operation, refer to the AvantGuard 4
User’s Manual.
14 Avant Guard 4/699
Func tion Press but ton(s)
Arm/Disarm
Activate Wired Auxiliary A Accessory (usually remote trunk release)
Silent Arm/Disarm
+ ✱
Remote Engine Starting
✱
Timed Headlight Activation
SmartWindows 4 Accessory
+
Activate Wired Auxiliary B Accessory (IntelliVoice 4 Accessory)
+ ✱
Activate Auxiliary C Accessory (Window All-Close)*
+
Remote Valet Mode Entry
+ ✱
Proximity Sensor Override
+
(39 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals